Friction Flying Saw for Welded Pipe Mill Line

• After-sales Service: Overseas Engineer Is Available
• Drive Mode: Pneumatic
• Automation: Automatic
• Warranty: 1 Year
• Transport Package: Naked Packing
• Specification: FJ 114
• Model NO.: FJ 114
• Trademark: Brilliance Machinery
• Origin: China
• Production Capacity: 100 Sets

Product Description

 

Product Description

Product Name: Friction cutting saw for steel pipe
In the high frequency pipe welding equipment, the cutting speed of the computer flying saw directly affects the production efficiency of the ERW tube pipe line, and the cutting accuracy and stability of the computer flying saw directly affects the quality of the welded pipe produced. It can be seen that computer flying saw plays an important role in high-frequency pipe welding equipment, and is an indispensable equipment in steel pipe production line.
The friction cutting saw is used for steel pipe cutting on ERW tube mill line.
The job of the computer flying friction saw on the high frequency pipe welding equipment can be summarized as follows: tracking the speed of the ERW Pipe mill, and cutting the steel pipe in continuous operation.
The specific work flow of the computer flying saw can be summarized as follows: it tracks the pipe speed, and cuts the size. Let the whole system by the computer (computer flying saw operating table) control, the use of DC speed regulation system, drive the mechanical actuator, saw to complete the start of the trolley, accelerated tracking (tracking pipe speed), synchronous operation, clamping, sizing cut, loose clamp, return, wait for the next work cycle of the whole process.

Product Features

1. Low noise, isolation and absorption.
2. Front and rear guide sleeve, improve the quality of pipe mouth, remove the tail. The bottom of the saw hood is sloping and the slope is larger. Add water blowing mechanism to clean the iron filings at the bottom of the saw hood. Time blowing, blowing duration is adjustable.
3. Add supporting rollers before and after to avoid wear of guide sleeve.
4. The clamping can be cancelled to improve the synchronous tracking ability. (Cancellation is not recommended). Double pump, clamp independent pump.
5. Traction structure, reverse holding wheel can be cancelled, equivalent to reduce the body, reduce rail wear.
6. The cylinder base is strengthened to prevent any vibration and damage. The key part that bears the sawing force.
7. Cylinder position to adapt to saw blade wear, can be adjusted. The adjustment quantity is generally 50mm.

8. Small wheels are installed on the outside of the car body, easy to remove.

9. When the wheel is worn, the height of the wheel axle can be adjusted. Avoid three legs when the wheel is worn. 3 mm.

10. Keyway and cross key are added between the saw arm support and the saw body. (After factory acceptance, welding before factory). Here is the non-fragile part.

11. Motor belt with 5V belt, transmission torque is 3-5 times of type B belt, is 2-3 times of type C belt. The pulley has a protective cover.

12. The linear speed of the saw blade shall ensure that the steel pipe has no large burrs inside and outside. The intermediate linear speed shall be selected according to the actual range, wall thickness range and outer diameter range. (User provides steel pipe outer diameter, wall thickness, material. 195-355 - b). Six points, 3.0, 355B. The linear velocity is 90 meters per second.

13.The DC solenoid valve coil is added with the continuing diode to improve the relay contact life. The AC contactor coil is added with resistance and capacitance absorption to avoid the internal arc of the device and its own interference.

14. The touch screen transmits data through Ethernet, and the production and startup of the production line can be directly observed remotely. Download the app on your phone, and you can watch live work from anywhere in the world (where you have Internet access).

Guide rail as a whole, GCr15 high-frequency quenching, avoid Cr plating.

15. Regular oil filling system, guide rail, gear. Fill oil once each time starting.

FAQ

1. Q:Are you manufacturer?
    A: Yes, we are manufacturer and trading company. We have our own technical team, and about 45000 sq.m workshop. Welcome to visit us .

2. Q:What kind of information you need before you give quotation?
A: The pipe diameter and thickness range which you gonna make or the profile drawings, material information, and your other special requirements.

3.Q:What kind of payment terms you can do ?
A: We are flexible about payment terms,such as T/T, L/C. we can help you on financing also,please contact us for details.

4. Q: Can your factory customize the machine for clients ?
   A: Yes, we can.

5. Q:How do you do QA?
   A : We have team do strict QA.

1. Every gearbox will be tested for 8 hours with oil inside to guarantee there is no leak.
2. Every shaft will be inspected for the centering jumpiness.
3. Every roller will be checked to make sure its tolerance, critical parts will be inspected for all dimensions.
4. For HF welder, we will do factory commissioning and will test all the protection functions.
5. For Flying computer saw, the factory inspection will also be proceeded before shipment.

6. Q: What is the warranty time for your ERW pipe machine?
    A: warranty period of ERW pipe mill : 12 months after commissioning.

7. Q: How about after-sales service ?
    A: We will send professional engineers to final customer's factory for machine installation , commissioning and carefully working training . The final customer will afford related cost.

8. Q:Why should i choose you? What's the difference between you and other Chinese supplier?
   A: We are concentrating on this pipe mill field for more than 15 years.We have professional researching, designing, processing, testing and after-sales service teams. Our pipe making machine lines have been exported to many countries , such as Turkey, Russia, Egypt, Vietnam etc.

9. Q:What should i do if i just start a new business ?
    A: contact us immediately, we can provide pre-sales consultant service free of charge.